• 0496/73.80.41
  • info@timsound.be

Audio Technica AT4041

De Audio Technica AT4041 is een professionele condensator microfoon ideaal voor opname van diverse instrumenten.

 

Info van audio-technica.com:

This premium electret condenser microphone is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. The AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low reflectivity. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.

  • Smooth, extended frequency response with a slight rise occurring in the high-frequency region
  • Ideal for drum overheads, acoustic guitar, banjo, piano, horns and under snare
  • Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • State-of-the-art design and manufacturing techniques ensure compliance with Audio-Technica’s stringent consistency and reliability standards
  • Switchable hi-pass filter and rugged turned-brass microphone housing
  • Custom shock mount provides superior isolation
  • 80Hz low-cut filter, 12dB / octave

Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 20 – 20.000 Hz
Open Circuit Sensitivity -36 dB (15.8 mV), re 1V at 1 Pa
Impedance 100 ohms
Maximum Input Sound Level 145 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off 80 Hz, 12 dB/octave
Dynamic Range 121 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 70 dB, 1 kHz at 1 Pa
Phantom Power Requirements 48V DC, 3.2 mA typical
Weight 120g
Dimensions 6.28″ (159.5 mm) long, 0.83″ (21.0 mm) body diameter
Output Connector Integral 3-pin XLRM-type